Steel rear bar build
Posted: Tue Mar 07, 2017 10:22 am
There were a few people that asked for dimensions etc for the rear bar that I made recently. I've just done a rough 2D CAD drawing of the bar in a plan view, and added a materials list with 2 cross sections.
The CAD Drawing will really need to be used in conjunction with the photographs if you want to have a crack at making one from the drawings.
The other issue, is the ends are splayed out to follow the same profile as the original bar, though this is not indicated in the drawing. It was a bit tricky to get those measurements.
Buildup pics are in the gallery at:
http://www.slunnie.com/coppermine/thumb ... p?album=85
The CAD Drawing will really need to be used in conjunction with the photographs if you want to have a crack at making one from the drawings.
The other issue, is the ends are splayed out to follow the same profile as the original bar, though this is not indicated in the drawing. It was a bit tricky to get those measurements.
Buildup pics are in the gallery at:
http://www.slunnie.com/coppermine/thumb ... p?album=85